Clicky

Fresche Quadrant Software BCD Software SoftBase NetLert ExcelSystems Software Development

Catapult Support

Installation Instructions

These instructions are for new installs of Catapult 8.0 (and higher) only. If you are upgrading Catapult from an earlier release, please log into myBCDSoftware.com to view the Upgrader's Guide. For additional product information, please visit the Catapult home page.

Step 3: Start the EXODUS55 Subsytem.

?Catapult uses a subsystem named EXODUS55 to manage transferring data between the PC and IBM i components.

  1. When the server side installation finishes run the WRKACTJOB command to check if the EXODUS55 subsystem is running. If this is a new install, it should be started automatically.
  2. If this is a second install, or you already have another BCD tool installed on your system that uses EXODUS55, the install will not start the subsystem automatically. You can start the subsystem at this point using this command:
  3. STRSBS XL_EX55/EXODUS55

  4. Once the subsystem has started, there should be a job under it called EXSERV.
  5. Continue to the next step.